Sony DSC-RX10M3 Help Guide Printable PDF - Page 64

When [ISO] is set to [ISO AUTO], the ISO value automatically changes to achieve the appropriate exposure using the aperture value and shutter speed you have set. If the aperture value and shutter speed you have set are not suitable for appropriate exposure, the ISO value indicator will blink. The Metered Manual indicator does not appear when [ISO] is set to [ISO AUTO]. When the amount of ambient light exceeds the metering range of the Metered Manual, the Metered Manual indicator flashes. The SteadyShot warning indicator does not appear in manual exposure mode. The brightness of the image on the monitor may differ from the actual image being shot. Hint You can change the shutter speed and aperture (F-value) combination without changing the set exposure value by rotating the aperture ring while pressing the AEL button. (Manual shift) [39] How to Use BULB Shooting Selecting a shooting mode You can shoot a trailing image of the movement of a subject with long exposure. BULB is suitable for shooting trails of light, such as fireworks. 1. Set the mode dial to M (Manual Exposure). 2. Turn the control dial clockwise until [BULB] is indicated. 3. Select the aperture value (F-value) using the aperture ring. 4. Press the shutter button halfway down to adjust the focus. 5. Press and hold the shutter button for the duration of the shooting. As long as the shutter button is pressed, the shutter remains open. Note Since the shutter speed becomes slow and the camera-shake tends to occur more easily, it is recommended that you use a tripod. The longer the exposure time, the more noise will be visible on the image. After shooting, noise reduction will be done for the same amount of time that the shutter was open. However, you cannot shoot any more while noise reduction is in progress. You cannot set the shutter speed to [BULB] in the following situations: When the [Smile Shutter] function is activated. When the [Auto HDR] function is activated.