Sony DSC-W560 Cyber-shot® Handbook - Page 117
Shooting still images/movies, Anti-blur function does not work. - charger
UPC - 027242809086
View all Sony DSC-W560 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Table of contents Operation Search The remaining charge indicator is incorrect. • This phenomenon occurs when you use the camera in an extremely hot or cold location. • A discrepancy arose between the remaining charge indicator and the actual remaining battery charge. Fully discharge the battery pack once, then charge it to correct the indication. The indicator may not be accurate depending on the conditions of use. • Battery capacity decreases over time and through repeated use. If decreased usage time between charges becomes significant, it is probably time to replace it with a new one. Cannot charge the battery pack. • You cannot charge the battery pack using the AC Adaptor (sold separately). Use the battery charger to charge the battery. The CHARGE lamp flashes while charging the battery. • Check that the battery pack type is NP-BN1. • The CHARGE lamp flashes infrequently when you use a battery pack that has not been used for a long time. • The CHARGE lamp (on the supplied battery charger) has two flash patterns, fast flash (approx. 0.15- second intervals) and slow flash (approx. 1.5-second intervals). If the lamp flashes quickly, remove the battery pack being charged, and then insert the same battery pack into the battery charger again (until it clicks). If the lamp flashes quickly again, this may indicate a battery pack problem. If the lamp flashes slowly, the charger is in standby mode and charging has temporarily stopped. Charging stops temporarily and standby mode results when the temperature is outside the range suitable for charging. Charging resumes and the CHARGE lamp lights when the temperature returns to the range suitable for charging. It is recommended to charge the battery pack within the proper charging temperature range between 10°C to 30°C (50°F to 86°F). • Refer to page 131 for details. MENU/Settings Search Index Shooting still images/movies Cannot record images. • Images are recorded on the internal memory even when a memory card is inserted into the camera. Make sure that the memory card is fully inserted into the camera. • Check the free capacity of the internal memory or the memory card. If it is full, do one of the following: - Delete unnecessary images (page 37). - Change the memory card. • You cannot record images while charging the flash. • When recording movies, it is recommended that you use the following memory cards: - "Memory Stick PRO Duo" (Mark2) media, "Memory Stick PRO-HG Duo" media - SD memory card, SDHC memory card or SDXC memory card (Class 4 or faster) • Set [Demo Mode] to [Off] (page 86). Smile Shutter function does not work. • No image is shot if a smiling face is not detected. • Set [Demo Mode] to [Off] (page 86). Anti-blur function does not work. • The anti-blur function may not work properly when shooting night scenes. • Shoot after pressing the shutter button halfway down. 117GB