Sony DSC-WX500 Help Guide (Printable PDF) - Page 51
Memory recall, Movie
View all Sony DSC-WX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
the Metered Manual indicator flashes. The SteadyShot warning indicator does not appear in manual exposure mode. The brightness of the image on the monitor may differ from the actual image being shot. [32] How to Use Shooting Selecting a shooting mode Memory recall Allows you to shoot an image after recalling often-used modes or camera settings registered in advance. 1. Set the mode dial to MR (Memory recall). 2. Press the left/right side of the control wheel or turn the control wheel to select the desired number, then press on the center. Note Register shooting settings in advance by [Memory]. If you set [Memory recall] after completing the shooting settings, the registered settings are given priority and the original settings may become invalid. Check the indicators on the screen before shooting. [33] How to Use Movie Shooting Selecting a shooting mode You can change the shooting mode for recording movies. You can also check the image angle before shooting. 1. Set the mode dial to (Movie). 2. MENU → (Camera Settings) → [Movie] → desired setting. When [Mode Dial Guide] is set to [On], you can select the desired settings after you have changed the position of the mode dial. 3. Press the MOVIE button to start recording. Press the MOVIE button again to stop recording.