Sony DVE7000S Operating Instructions - Page 48

Listening from an Audio Component By connecting an audio component having built-in Dolby Digital decoder or DTS decoder using an optical digital cord, you can enjoy the disc recorded in Dolby Digital or DTS sound with surround effects. Set the [AUDIO SETUP] items according to the audio component connected ( page 43). Refer to the operating manual supplied with the component connected. Using an audio cord 1 Connect an audio component. to AUDIO LINE SELECT Audio cord (mini jack, not supplied) Stereo component 2 Set the LINE SELECT switch to OUT.  Tip When the audio component supports Dolby Surround (Pro Logic), select [DOLBY SURROUND] in [DOWNMIX] under [AUDIO SETUP]. Otherwise, select [NORMAL] ( page 43). Using an optical digital cord 1 Connect a digital audio component. to AUDIO LINE SELECT Optical digital cord (not supplied) to optical digital input Digital audio component 2 Set the LINE SELECT switch to OUT.  Tips • When the audio component supports Dolby Surround (Pro Logic), select [DOLBY SURROUND] in [DOWNMIX] under [AUDIO SETUP]. Otherwise, select [NORMAL] ( page 43). • When connecting an amplifier having a built-in Dolby Digital decoder, select [DOLBY DIGITAL] in [DOLBY DIGITAL] in [DIGITAL OUT SETUP] under [AUDIO SETUP] ( page 43). • When connecting an amplifier having a built-in DTS decoder, select [DTS] in [DTS] in [DIGITAL OUT SETUP] under [AUDIO SETUP] ( page 43). 48