Sony DVP-S9000ES Operating Instructions - Page 67
Sound, Operation, VIDEO CD or a CD.
View all Sony DVP-S9000ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Additional Information Sound There is no sound. , Check that the player is connected securely. , The audio connecting cord is damaged. Replace it with a new one. , Make sure you connect the player to the audio input connectors on the receiver (amplifier). (page 12) , Make sure you turn on the TV and the receiver (amplifier). , Make sure you select the appropriate input on the receiver (amplifier) so that you can listen to the sound from the player. , The player is in pause mode or in Slow-motion Play mode. Press H to return to normal play mode. , The player is in fast forward or fast reverse mode. Press H to return to normal play mode. , Check the speaker connections and setting (page 15). Refer to the operating manual of your receiver (amplifier). , If you use the DIGITAL OUT connectors, set "DIGITAL OUT" to "ON" in the setup display. Otherwise no sound will come from the DIGITAL OUT connectors. (page 60) , SACD audio signals are not output from the DIGITAL OUT OPTICAL or COAXIAL connectors. Sound is noisy. , Clean the disc. , When you play a CD with DTS sound tracks, noise will come from any connector other than the DIGITAL OUT OPTICAL or COAXIAL connector. (page 19) Sound distortion occurs. , In the setup display, set "AUDIO ATT" in "AUDIO SETUP" to "ON." (page 60) The sound loses its stereo effect when you play a VIDEO CD or a CD. , Set "AUDIO" to "STEREO" in the Control Menu display. (page 35) , Make sure you connect the player correctly. (pages 10, 12, 14) Operation The remote does not function. , Remove any obstacles between the remote and the player. , Use the remote near the player. , Point the remote at the remote sensor on the player. , Replace all of the batteries in the remote with new ones if they are weak. The disc does not play. , There is no disc inside ("Insert disc." appears on the TV screen). Insert a disc. , Insert the disc correctly with the playback side facing down on the disc tray. , Clean the disc. , The player cannot play CD-ROMs, etc. (page 5) Insert a DVD, a VIDEO CD, or CD. , Check the region code of the DVD. (page 5) , Moisture has condensed inside the player. Remove the disc and leave the player turned on for about half an hour. (page 8) The player does not play from the beginning when playing a disc. , Program Play, Shuffle Play, Repeat Play or A-B Repeat Play has been selected. Press CLEAR. (pages 45 through 49) , Resume Play has been selected. Press x on the front panel or on the remote before you start playing. (page 23) , A title menu or a DVD menu automatically appears on the TV screen when you play your DVD, or a setup display automatically appears on the TV screen when you play your VIDEO CD with PBC functions. The player starts playing the disc automatically. , The DVD features the auto playback function. , "AUTO PLAY" in "CUSTOM SETUP" is set to "TIMER." (page 56) Playback stops automatically. , The disc may contain an auto pause signal. While playing such a disc, the player stops playback at the signal. 67