Sony ECM-W3 Help Guide - Page 20
About the mode switch ECM-W3
View all Sony ECM-W3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Help Guide Wireless Microphone ECM-W3 / ECM-W3S About the mode switch (ECM-W3) Before you start video recording with the camera, select a receiver mode with the mode switch. SEP mode Makes recordings with audio from either of the two microphones individually as the left or right channel audio. The audio from the microphone No. 1 is output to the left channel; and the audio from the microphone No. 2 is output to the right channel. When a single microphone is used for sound pickup, the audio is output as follows: When only the microphone No. 1 is in use: The audio is output only to the left channel; and no audio is output to the right channel. When only the microphone No. 2 is in use: The audio is output only to the right channel; and no audio is output to the left channel. Hint On the nameplate under the clip of the microphone, you will find either the number "1" or "2" indicated for microphone identification. The number "1" indicates the microphone No. 1; and the number "2" indicates the microphone No. 2. Use this number to distinguish the microphone No. 1 and the microphone No. 2. MIX mode Makes recordings with mixed audio from the two microphones. Related Topic Recording Recording with an external microphone Lamp indications 5-055-395-11(1) Copyright 2023 Sony Corporation 20