Sony ECM-W3 Help Guide - Page 9
Charging the built-in batteries
View all Sony ECM-W3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Help Guide Wireless Microphone ECM-W3 / ECM-W3S Charging the built-in batteries Each of the receiver, the microphone, and the charging case contains a built-in lithium-ion rechargeable battery. Connect the charging case and a power source with a USB Type-C cable (commercially available) for battery charging. Note Before charging the built-in batteries, be sure to turn off the receiver and the microphone. Battery charging can go on while the receiver and the microphone are turned on. However, placing the receiver and the microphone in the charging case automatically turns them off. This means that the next time you use the receiver and the microphone, you must select "OFF" once with the slide switch on the receiver and with the power switch on the microphone, and then turn them back on. In the event that the receiver and the microphone are removed from the charging case after battery charging is conducted while the receiver and the microphone are turned on, placing them back in the charging case without changing the switch selection does not start battery charging. 1 Place the receiver and the microphone in the charging case. Note Be sure to push in the microphone until it clicks into place. When the microphone is properly seated, its power lamp lights in orange, indicating that the battery charging has started. ECM-W3 ECM-W3S 9