Sony EVID70P Operating Instructions - Page 42

5 Insert the protrusions raised on the ceiling bracket (A) into the spaces prepared in the ceiling bracket (B), and temporarily attach them by pushing the ceiling bracket (A) to the rear. Ceiling bracket (B) Ceiling 7 Connect the cables to the connectors on the rear of the camera. Ceiling Ceiling bracket (A) 6 While pushing up on the front part of the camera, attach it using the three screws provided (3M 3 × 6), starting with the screw at position 1. Ceiling Note Take the proper steps to ensure that the load of the cables connected does not cause problems. Removing the camera 1 Remove the 3 screws used to attach the camera in step 6 of "Installation." 2 While pushing the entire camera up towards the ceiling, move the camera to the front. The hooks will disengage, and you can remove the camera. 1 3M 3 × 6 (supplied) GB 42 Preparations