Sony EVID70P Operating Instructions - Page 44

Turning on the Power

Get Sony EVID70P PDF manuals and user guides View all Sony EVID70P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

Notes • You cannot connect your Color Video Camera to a computer that is not equipped with either video input or an S-Video input connector. You might not be able to use your existing computer with your Color Video Camera unless you provide the computer with a video capture board and/ or software. Consult your computer dealer or manufacturer for details. • Use only the AC power adaptor (MPAAC1) supplied with the unit. Do not use any other AC power adaptor. Polarity of the plug • Do not make VISCA RS-232C and RS422 connections at the same time, as this may cause malfunctions. Turning on the Power 1 Connect the main unit to an AC outlet using the supplied AC power adaptor and power cord. The POWER lamp lights up. As long as the main unit is connected to an AC outlet, you can turn the camera on or off with the POWER switch on the Remote Commander. (When you turn the power off using the Remote Commander, the POWER lamp turns off and the STANDBY lamp lights up.) When the power is turned on, the camera will automatically face first toward the upper left-hand side, and then the front, which is the home position of the camera. (Pan/tilt reset action) to AC outlet Lights up 2 Turn on the peripheral devices. GB 44 Preparations

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
GB
44
Preparations
•
You cannot connect your Color Video
Camera to a computer that is not equipped
with either video input or an S-Video input
connector. You might not be able to use
your existing computer with your Color
Video Camera unless you provide the
computer with a video capture board and/
or software. Consult your computer dealer
or manufacturer for details.
•
Use only the AC power adaptor (MPA-
AC1) supplied with the unit. Do not use
any other AC power adaptor.
•
Do not make VISCA RS-232C and RS-
422 connections at the same time, as this
may cause malfunctions.
1
Connect the main unit to an AC outlet
using the supplied AC power adaptor
and power cord.
The POWER lamp lights up.
As long as the main unit is connected to
an AC outlet, you can turn the camera on
or off with the POWER switch on the
Remote Commander. (When you turn
the power off using the Remote
Commander, the POWER lamp turns off
and the STANDBY lamp lights up.)
When the power is turned on, the camera
will automatically face first toward the
upper left-hand side, and then the front,
which is the home position of the
camera. (Pan/tilt reset action)
2
Turn on the peripheral devices.
Notes
Polarity of the plug
Turning on the Power
to AC outlet
Lights up