Sony GDM-5410 Operation Guide - Page 17
Specifications
View all Sony GDM-5410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Self-diagnosis function This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer(s), the screen will go blank and the 1 (power) indicator will either light up green or flash amber. If the 1 (power) indicator is lit in amber, the computer is in power saving mode. Try pressing any key on the keyboard. 1 (power) indicator If the 1 (power) indicator is green 1 Remove any plugs from the video input 1 and 2 connectors, or turn off the connected computer(s). 2 Press the 1 (power) button twice to turn the monitor off and then on. 3 Press the , button for 2 seconds before the monitor enters power saving mode. If all four color bars appear (white, red, green, blue), the monitor is working properly. Reconnect the video input cables and check the condition of your computer(s). If the color bars do not appear, there is a potential monitor failure. Inform your service representative of the monitor's condition. If the 1 (power) indicator is flashing amber Press the 1 (power) button twice to turn the monitor off and then on. If the 1 (power) indicator lights up green, the monitor is working properly. If the 1 (power) indicator is still flashing, there is a potential monitor failure. Count the number of seconds between amber flashes of the 1 (power) indicator and inform your service representative of the monitor's condition. Be sure to note the model name and serial number of your monitor. Also note the make and model of your computer and video board. Specifications CRT 0.24 mm aperture grille pitch 21 inches measured diagonally 90-degree deflection FD Trinitron Viewable image size Approx. 403.8 × 302.2 mm (w/h) (15.9 × 11.9 inches) 19.8" viewing image Recommended resolution Horizontal: 1280 dots Vertical: 1024 lines Standard image area Approx. 388 × 291 mm (w/h) (15 1/4 × 11 1/2 inches) or Approx. 364 × 291 mm (w/h) (14 3/8 × 11 1/2 inches) Deflection frequency* Horizontal: 30 to 121 kHz Vertical: 48 to 160 Hz AC input voltage/current 100 to 240 V, 50 - 60 Hz, 2.0 - 1.0 A Power consumption Approx. 145 W Dimensions Approx. 501 × 498 × 498 mm (w/h/d) (19 3/4 × 19 5/8 × 19 5/8 inches) Mass Approx. 32 kg (70 lb 9 oz) Plug and Play DDC1/2B/2Bi, GTF** * Recommended horizontal and vertical timing condition • Horizontal sync width duty should be more than 4.8% of total horizontal time or 0.8 µs, whichever is larger. • Horizontal blanking width should be more than 2.3 µsec. • Vertical blanking width should be more than 450 µsec. ** If the input signal is Generalized Timing Formula (GTF) compliant, the GTF feature of the monitor will automatically provide an optimal image for the screen. Design and specifications are subject to change without notice. 18