Sony GDM-90W01T5 Operation Guide - Page 11
Adjusting the color, temperature, Resetting to the factory, preset levels
View all Sony GDM-90W01T5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Adjusting the color temperature The adjustment data becomes the common setting for all input signals received. 1 Press the button. The "COLOR" OSD appears. COLOR COLOR TEMPERATURE 5000K 6500K 9300K VAR I ABLE SELECT SET / ADJUST 2 Press the >?// buttons to select a color temperature. The factory settings are: 5000K, 6500K, 9300K Adjusting the color temperature Press the ¨./> button to select "VARIABLE," and adjust by pressing the >?// button. The figure of the adjusted color temperature changes. The OSD automatically disappears after about 30 seconds. To turn off the OSD, press the button again. To reset, press the ? (reset) button while the OSD is on. The selected color tempetarure is reset. The adjustments you made in the expert mode (page 14) are also reset. Resetting to the factorypreset levels 1 Press the button of the OSD you want to reset to the factory setting. 2 When the parameters are arranged in vertical row in the OSD, select a parameter you want to reset by pressing the ¨./> buttons. 3 Press the ? (reset) button. Resetting all adjustment data When there is no OSD displayed, press and hold the ? (reset) button for more than two seconds. All adjustment data including the brightness and contrast are reset to factory-preset levels. Resetting the picture size, position, EN moire, and geometry* at the same time When there is no OSD displayed, press and hold the ? F (reset) button for one second. The above items of the current input signal are reset to D factory-preset levels. * The "Rotation" adjustment (pages 9, 13) is not reset. ES I J 11