Sony GDM-90W01T5 Operation Guide - Page 14
Adjusting the color, Resetting to the factory, preset levels, Adjustments Expert mode
View all Sony GDM-90W01T5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Adjustments (Expert mode) CANCEL MOIRE: Cancels the moire when "ON" is selected. The adjustment data becomes the individual setting for each input signal received. MOIRE ADJ: Reduces fuzziress of the picture caused by canceling moire. Adjust beginning from 0 until the moire is minimum. The adjustment data becomes the individual setting for each input signal received. LANDING: See "Landing" on page 10. The adjustment data becomes the common setting for all input signals received. DEGAUSS: See "Degaussing the screen" on page 15. The OSD automatically disappears after about 30 seconds. To turn off the OSD, press the button again. To reset, press the ? (reset) button while the OSD is on. The selected parameter is reset. To reset all parameters of a particular color temperature Select the color temperature in step 2, and then press the ? (reset) button. All parameters of the color temperature are reset and "++" at the right shoulder disappears. To reset a particular parameter of a particular color temperature Select the parameter in step 3, and then press the ? (reset) button. Only the selected parameter of the color temperature is reset. Resetting to the factorypreset levels Reset in the same way as described in "Resetting to the factory-preset levels" on page 11. Adjusting the color The adjustment data becomes the common setting for all input signals received. 1 Press the button. The "COLOR" OSD appears. COLOR EXPERT COLOR TEMPERATURE 5000K 6500K 9300K VAR I ABLE 100 R B I AS 50 G B I AS 50 B B I AS 50 R GA I N 50 G GA I N 50 B GA I N 50 SELECT SET / ADJUST 2 Press the >?// button to select the color temperature to adjust, 5000, 6500 or 9300. 3 Press the ¨./> button to select and the >?// button to adjust the parameter. VARIABLE: Adjusts the color selected in step 2 to the desired color temperature. The figure of the selected color temperature changes. R BIAS/G BIAS/B BIAS: Adjusts the black level of each signal. "++" appears at the right shoulder of the adjusted color temperature. R GAIN/G GAIN/B GAIN: Adjusts the white level of each signal. "++" appears at the right shoulder of the adjusted color temperature. The OSD automatically disappears after about 30 seconds. To turn off the OSD, press the button again. 14