Sony GPS-CS1KASP Operating Instructions - Page 24
Attach the GPS unit to the handle of a bicycle or a motorcycle using the holder
UPC - 027242731189
View all Sony GPS-CS1KASP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Attach the GPS unit to the handle of a bicycle or a motorcycle using the holder Using the supplied holder and bracket, you can attach the GPS unit to the handle of a bicycle or a motorcycle. • The diameter of the handle supported by the bracket is 20 mm to 35 mm. • Attach the bracket to the part where the GPS unit will not interfere with the operation of the bicycle or motorcycle. • The compatibility of the bracket cannot be guaranteed for all bicycles or motorcycles. 1 Attach the bracket to the handle of the bicycle etc., following the procedure below. 1 Remove the screw cap of the bracket, then wind the belt around the handle. 2 Adjust the belt and leave approx. 3 mm of space for the part [A] as illustrated below. 3 Tighten the screw of the bracket firmly to fix it to the handle. Pull both sides of the belt to loosen the belt. 3 mm Screw cap 2 Insert the GPS unit into the carrying case. GB 24