Sony GPS-CS1KASP Operating Instructions - Page 29

Checking remaining battery power, tracking. Replace the battery with a new one.

Page 29 highlights

Checking remaining battery power • You can check the remaining battery power on the status of the BATT lamp by pressing (Power) button shorter with the power turned on. Lights in green: 70 % or more power remains.* Flashes green: 20 % to 70 % power remains.* When the available remaining power becomes 20 % or lower, the BATT lamp flashes red. When the remaining power becomes even lower, the BATT lamp flashes more frequently and the unit is deactivated for tracking. Replace the battery with a new one. * This function may not operate properly when using a Nickel-Metal Hydride battery. BATT lamp GB The unit consumes more battery power while searching than while tracking. Even if the unit calculates the remaining battery power and makes the BATT lamp flash red while searching, when the unit switches from searching to tracking, you may be able to use the unit longer. GB Using the unit 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91

Using the unit
GB
29
GB
Checking remaining battery power
You can check the remaining battery power on the status of the BATT
lamp by pressing
(Power) button shorter with the power turned on.
Lights in green: 70 % or more power remains.*
Flashes green: 20 % to 70 % power remains.*
When the available remaining power becomes 20 % or lower, the BATT
lamp flashes red. When the remaining power becomes even lower, the
BATT lamp flashes more frequently and the unit is deactivated for
tracking. Replace the battery with a new one.
* This function may not operate properly when using a Nickel-Metal Hydride
battery.
The unit consumes more battery power while searching than while
tracking.
Even if the unit calculates the remaining battery power and makes the
BATT lamp flash red while searching, when the unit switches from
searching to tracking, you may be able to use the unit longer.
BATT lamp