Sony GTK-XB5 Operating Instructions - Page 26
Precautions, Disconnect and reconnect the, AC power cord, and then turn, on the system. - reset
View all Sony GTK-XB5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Unable to connect a BLUETOOTH device with the system in the speaker add function. •• After connecting two GTK-XB5 systems, perform the pairing procedure between a BLUETOOTH device and the system where the (BLUETOOTH) indicator is flashing. Then perform the BLUETOOTH connection. Resetting the system If the system still does not operate properly, reset the system to factory default settings. 1 Disconnect and reconnect the AC power cord, and then turn on the system. 2 Hold down FUNCTION PAIRING and the volume - button for more than 5 seconds. After the , (BLUETOOTH), and AUDIO IN indicators on the unit flash for more than 3 seconds, all user-configured settings, such as the pairing registration information, are reset to factory default settings. Precautions On safety ••Completely disconnect the AC power cord (mains lead) from the wall outlet (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull the cord itself. ••Should any solid object or liquid get into the system, unplug the system, and have it checked by qualified personnel before operating it again. ••AC power cord must be changed only at the qualified service shop. On placement ••Do not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking adequate ventilation, or subject to vibration, direct sunlight or a bright light. ••Be careful when placing the system on surfaces that have been specially treated (for example, wax, oil, polish) as staining or discoloration of the surface may result. ••Make sure not to splash water on the unit. This unit is not waterproof. On heat buildup ••Heat buildup on the system during operation is normal and is not a cause for alarm. ••Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot. ••Do not obstruct the ventilation holes. On the speaker system The built-in speaker system is not magnetically shielded, and the picture on nearby TV sets may become magnetically distorted. In this situation, turn off the TV, wait 15 to 30 minutes, and turn it back on. If there is no improvement, move the system far away from the TV. Cleaning the cabinet Clean this system with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as thinner, benzine, or alcohol. 26GB