Sony HBD-E770W Operating Instructions - Page 17
Step 2: Connecting the System, Connecting the speakers
View all Sony HBD-E770W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Getting Started Step 2: Connecting the System For connecting the system, read the information on the following pages. Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other connections are made. Note • When you connect another component with a volume control, turn down the volume of the other components to a level where sound is not distorted. Connecting the speakers The connector of the speaker cords and the color tube are color-coded depending on the type of speaker. Connect the speaker cords to match the color of the SPEAKERS jacks of the unit. Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Do not catch the speaker cord insulation (rubber covering) in the speaker terminals. To connect speaker cords to the unit and surround amplifier When connecting to the unit and surround amplifier, insert the connector until it clicks. Rear panel of the unit White (Front left speaker (L)) SPEAKERS FRONT R FRONT L SUBWOOFER CENTER Red (Front right speaker (R)) Rear panel of the surround amplifier Gray (Surround right speaker (R)) Green (Center speaker) Purple (Subwoofer) R L IMPEDANC3E-1U6SE SPEAKERS Blue (Surround left speaker (L)) To connect speaker cords to the speaker Color tube (+) Rear or bottom of the speaker Connector (-) 17US