Sony HBD-E770W Operating Instructions - Page 60
Also, set [Audio Return Channel] in [HDMI Settings] of [System, the Audio Return Channel
View all Sony HBD-E770W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Symptom Problems and solutions There is no digital sound from • Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On] the HDMI OUT jack when using (page 53). Also, set [Audio Return Channel] in [HDMI Settings] of [System the Audio Return Channel Settings] to [Auto] (page 53). function. • Make sure that your TV is compatible with the Audio Return Channel function. • Make sure that an HDMI cable is connected to a jack on your TV that is compatible with the Audio Return Channel function. • The sampling frequency of the input stream is more than 48 kHz. The system does not output • Set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Off] sound correctly when connected (page 45). to a set-top box. Severe hum or noise is heard. • Check that the connecting cords are away from a transformer or motor, and at least 10 feet (3 meters) away from your TV set or a fluorescent light. • Move your TV away from the audio components. • Clean the disc. The sound loses stereo effect when you play a CD. • Select stereo sound by pressing AUDIO (page 34). The surround effect is difficult to • Check the surround setting (page 27). hear when you are playing a • Check the speaker connections and settings (pages 17, 46). sound track of Dolby Digital, DTS, or MPEG audio. • Depending on the BD/DVD, the output signal may not be the entire 5.1 channel. It may be monaural or stereo even if the sound track is recorded in Dolby Digital or MPEG audio format. The sound comes from the center • Depending on the disc, the sound may come from the center speaker only. speaker only. No sound is heard from the center speaker. • Check the speaker connections and settings (pages 17, 46). • Check the surround setting (page 27). • Depending on the source, the effect of the center speaker may be less noticeable. • A 2 channel source is being played. No sound or only a very lowlevel sound is heard from the surround speakers. • Check the speaker connections and settings (pages 17, 46). • Check the surround setting (page 27). • Depending on the source, the effect of the surround speakers may be less noticeable. • Check the wireless setting (page 24). • A 2 channel source is being played. The beginning of the sound is cut • Set the sound mode to "MOVIE" or "MUSIC" (page 34). off. • Select "A.F.D. STD" for "SUR.SETTING" (page 27). The sound effects are disabled. • The effects of SOUND MODE, "D.BASS," "NIGHT MODE," and "SUR.SETTING" may be disabled depending on the input stream (page 52). Distortion occurs in the sound of • Reduce the input level for the connected component by setting [Attenuate - a connected component. AUDIO] (page 51). 60US