Sony HBD-E770W Operating Instructions - Page 68
Specifications, BD/DVD/Super Audio CD/CD System
![]() |
View all Sony HBD-E770W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Specifications Amplifier Section POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC) Front L + Front R: With 3 ohms loads, both channels driven, from 180 - 20,000 Hz; rated 60 watts per channel minimum RMS power, with no more than 1% total harmonic distortion from 250 milli watts to rated output. POWER OUTPUT (reference) Front L/Front R/Center: 167 W (per channel at 3 ohms, 1 kHz) Subwoofer: 165 W (at 3 ohms, 80 Hz) Inputs (Analog) AUDIO (AUDIO IN) Sensitivity: 450/250 mV Inputs (Digital) SAT/CABLE (COAXIAL), TV (OPTICAL) Supported formats: LPCM 2CH (up to 48 kHz), Dolby Digital, DTS Video Section Outputs VIDEO: 1 Vp-p 75 ohms COMPONENT: Y: 1 Vp-p 75 ohms PB/CB, PR/CR: 0.7 Vp-p 75 ohms HDMI OUT: Type A (19 pin) BD/DVD/Super Audio CD/CD System Signal format system NTSC USB Section (USB) port: Maximum current: Type A (For connecting USB memory, memory card reader, digital still camera, and digital video camera) 500 mA LAN Section LAN (100) terminal 100BASE-TX Terminal Tuner Section System PLL quartz-locked digital synthesizer FM tuner section Tuning range 87.5 MHz - 108.0 MHz (100 kHz step) Antenna (aerial) FM wire antenna (aerial) Antenna (aerial) terminals 75 ohms, unbalanced 68US Intermediate frequency 10.7 MHz Speakers Front/Surround (SS-TSB101) Speaker system Full range Bass reflex Speaker unit 55 mm × 80 mm (2 1/4 in × 3 1/4 in) cone type Rated impedance 3 ohms Dimensions (approx.) 75 mm × 225 mm × 71 mm (3 in × 8 7/8 in × 2 7/8 in) (w/h/d) Mass (approx.) 0.45 kg (1 lb) Center (SS-CTB101) Speaker system Speaker unit Rated impedance Dimensions (approx.) Mass (approx.) Full range Acoustic suspension 30 mm × 60 mm (1 3/16 in × 2 3/8 in) cone type 3 ohms 290 mm × 49 mm × 49 mm (11 1/2 in × 1 15/16 in × 1 15/16 in) (w/h/d) 0.28 kg (10 oz) Subwoofer (SS-WSB102) Speaker system Speaker unit Rated impedance Dimensions (approx.) Mass (approx.) Subwoofer Bass reflex 180 mm (7 1/8 in) cone type 3 ohms 275 mm × 405 mm × 275 mm (10 7/8 in × 16 in × 10 7/8 in) (w/h/d) 7.5 kg (16 lb 12 oz) General Power requirements Power consumption Dimensions (approx.) Mass (approx.) 120 V AC, 60 Hz On: 130 W Standby: 0.3 W (at the Power Saving mode) 430 mm × 85 mm × 335 mm (17 in × 3 3/8 in × 13 1/4 in) (w/h/d) incl. projecting parts 430 mm × 85 mm × 365 mm (17 in × 3 3/8 in × 14 3/8 in) (w/h/d) (incl. wireless transceiver) 4.7 kg (10 lb 6 oz) Surround amplifier (TA-SA200WR) Amplifier Section POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC) With 3 ohms loads, both channels driven, from 120 - 20,000 Hz; rated 45 watts per channel minimum RMS power, with no more
![](/manual_guide/products/sony-bdve770w-operating-instructions-e9189eb/68.png)