Sony HCD-DZ100 Operating Instructions - Page 17
The screws should protrude 5 to 7 mm 7/32 to 9/32 inch., Hang the speakers on the screws.
View all Sony HCD-DZ100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Getting Started The screws should protrude 5 to 7 mm (7/32 to 9/32 inch). 5 to 7 mm (7/32 to 9/32 inch) 3 Hang the speakers on the screws. 4.6 mm (3/16 inch) 10 mm (13/32 inch) Hole on the back of the speaker Note • Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where reinforcement is applied. • Contact a screw shop or installer regarding the wall material or screws to be used. • Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. 17GB
Getting Started
17
GB
The screws should protrude 5 to 7 mm (7/32 to 9/32 inch).
3
Hang the speakers on the screws.
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.
• Contact a screw shop or installer regarding the wall material or screws to be used.
• Sony is not responsible for accident or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
Note
5 to 7 mm
(
7
/
32
to
9
/
32
inch)
4.6 mm
(
3
/
16
inch)
10 mm
(
13
/
32
inch)
Hole on the back of
the speaker