Sony HCD-EC709iP Service Manual - Page 1

Sony HCD-EC709iP - Cd Deck Receiver Component Manual

Page 1 highlights

HCD-EC709iP/EC909iP SERVICE MANUAL Ver. 1.0 2010.03 US Model Canadian Model Australian Model • HCD-EC709iP is the amplifier, CD player, tuner and iPod/iPhone section in MHC-EC709iP. • HCD-EC909iP is the amplifier, CD player, tuner and iPod/iPhone section in MHC-EC909iP. Photo: HCD-EC909iP ÎiPod is a trademark of Apple Inc., registered in the U.S. and other countries. ÎiPhone is a trademark of Apple Inc. ÎMPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and omson. ÎAll other trademarks and registered trademarks are of ® their respective holders. In this manual, TM and marks are not speci ed. Model Name Using Similar Mechanism Base Unit Name Optical Pick-up Block Name NEW BU-D1BD73 DA11MMVGP Main unit AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: ( e United States model only) Front Speaker With 12 ohm loads, both channels driven, from 120 - 10,000 Hz; rated 70 watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250 milliwatts to rated output. Ampli er section e following measured at AC 120 V, 60 Hz (North American model) e following measured at AC 240 V, 50/60 Hz (Australian model) HCD-EC909iP North American model: Front Speaker RMS output power (reference): 180 W + 180 W (per channel at 12 Ω, 1 kHz) Subwoofer RMS output power (reference): 180 W (at 12 Ω, 80 Hz) Australian model: Front Speaker Power output (rated): 85 W + 85 W (at 12 Ω, 1 kHz, 1% THD) RMS output power (reference): 180 W + 180 W (per channel at 12 Ω, 1 kHz) Subwoofer RMS output power (reference): 180 W (at 12 Ω, 80 Hz) HCD-EC709iP North American model: RMS output power (reference): 180 W + 180 W (per channel at 12 Ω, 1 kHz) Australian model: Power output (rated): 85 W + 85 W (at 12 Ω, 1 kHz, 1% THD) RMS output power (reference): 180 W + 180 W (per channel at 12 Ω, 1 kHz) Inputs PC IN (stereo mini jack): Sensitivity 800 mV, impedance 22 kilohms Outputs SPEAKERS: Impedance 12 Ω SUBWOOFER (MHC-EC909iP only): Impedance 12 Ω SPECIFICATIONS CD player section System: Compact disc and digital audio system Laser Diode Properties Emission Duration: Continuous Laser Output*: Less than 44.6µW * is output is the value measurement at a distance of 200mm from the objective lens surface on the Optical Pick-up Block with 7mm aperture. Frequency response: 20 Hz − 20 kHz Signal-to-noise ratio: More than 90 dB Dynamic range: More than 88 dB Tuner section FM stereo, FM/AM superheterodyne tuner Antenna: FM lead antenna AM loop antenna FM tuner section: Tuning range North American model: 87.5 MHz − 108.0 MHz (100 kHz step) Australian model: 87.5 MHz − 108.0 MHz (50 kHz step) Intermediate frequency: 225 kHz AM tuner section: Tuning range North American model: 530 kHz − 1,710 kHz (10 kHz step) 531 kHz − 1,710 kHz (9 kHz step) Australian model: 531 kHz − 1,710 kHz (9 kHz step) 530 kHz − 1,710 kHz (10 kHz step) Intermediate frequency: 53 kHz iPod/iPhone section Compatible iPod/iPhone models: iPhone 3GS iPhone 3G iPhone iPod nano 5th generation (video camera) iPod touch 2nd generation iPod classic 120GB 160GB (2009) iPod nano 4th generation (video) iPod classic 160GB (2007) iPod touch 1st generation iPod nano 3rd generation (video) iPod classic 80GB iPod nano 2nd generation (aluminum) iPod 5th generation (video) iPod nano 1st generation iPod 4th generation (color display) General Power requirements: North American model: AC 120 V, 60 Hz Australian model: AC 230 V − 240 V, 50/60 Hz Power consumption: HCD-EC909iP North American model: 250 W Australian model: 250 W (0.5 W at the Power Saving Mode) HCD-EC709iP North American model: 200 W Australian model: 200 W (0.5 W at the Power Saving Mode) Dimensions (W/H/D) (excl. speakers): Approx. 200 mm × 306 mm × 389 mm Mass (excl. speakers): HCD-EC909iP Approx. 5.7 kg HCD-EC709iP Approx. 5.5 kg Design and speci cations are subject to change without notice. W Standby power consumption: 0.5 W W Halogenated ame retardants are not used in the certain printed wiring boards. iPod 4th generation iPod mini COMPACT DISC RECEIVER 9-889-760-01 2010C05-1 © 2010.03 Sony Corporation Audio&Video Business Group Published by Sony Techno Create Corporation

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52

SERVICE MANUAL
Sony Corporation
Audio&Video Business Group
Published by Sony Techno Create Corporation
HCD-EC709iP/EC909iP
SPECIFICATIONS
COMPACT DISC RECEIVER
9-889-760-01
2010C05-1
©
2010.03
US Model
Canadian Model
Australian Model
Ver. 1.0
2010.03
• HCD-EC709iP is the amplifier, CD player, tuner
and iPod/iPhone section in MHC-EC709iP.
• HCD-EC909iP is the amplifier, CD player, tuner
and iPod/iPhone section in MHC-EC909iP.
Model Name Using Similar Mechanism
NEW
Base Unit Name
BU-D1BD73
Optical Pick-up Block Name
DA11MMVGP
Photo: HCD-EC909iP
iPod/iPhone section
Compatible iPod/iPhone models:
iPhone 3GS
iPhone 3G
iPhone
iPod nano
5th generation
(video camera)
iPod touch
2nd generation
iPod classic
120GB
160GB (2009)
iPod nano
4th generation
(video)
iPod classic
160GB (2007)
iPod touch
1st generation
iPod nano
3rd generation
(video)
iPod classic
80GB
iPod nano
2nd generation
(aluminum)
iPod
5th generation
(video)
iPod nano
1st generation
iPod
4th generation
(color display)
iPod
4th generation
iPod mini
General
Power requirements:
North American model: AC 120 V, 60 Hz
Australian model: AC 230 V - 240 V, 50/60 Hz
Power consumption:
HCD-EC909iP
North American model: 250 W
Australian model: 250 W
(0.5 W at the Power Saving Mode)
HCD-EC709iP
North American model: 200 W
Australian model: 200 W
(0.5 W at the Power Saving Mode)
Dimensions (W/H/D) (excl. speakers):
Approx. 200 mm × 306 mm × 389 mm
Mass (excl. speakers):
HCD-EC909iP
Approx. 5.7 kg
HCD-EC709iP
Approx. 5.5 kg
Standby power consumption: 0.5 W
wiring boards.
Main unit
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
Front Speaker
With 12 ohm loads, both channels driven, from 120 – 10,000 Hz;
rated 70 watts per channel minimum RMS power, with no more than
0.7% total harmonic distortion from 250 milliwatts to rated output.
Amplifier section
(North American model)
(Australian model)
HCD-EC909iP
North American model:
Front Speaker
RMS output power (reference):
180 W + 180 W (per channel at 12 Ω, 1 kHz)
Subwoofer
RMS output power (reference):
180 W (at 12 Ω, 80 Hz)
Australian model:
Front Speaker
Power output (rated):
85 W + 85 W (at 12 Ω, 1 kHz, 1% THD)
RMS output power (reference):
180 W + 180 W (per channel at 12 Ω, 1 kHz)
Subwoofer
RMS output power (reference):
180 W (at 12 Ω, 80 Hz)
HCD-EC709iP
North American model:
RMS output power (reference):
180 W + 180 W (per channel at 12 Ω, 1 kHz)
Australian model:
Power output (rated):
85 W + 85 W (at 12 Ω, 1 kHz, 1% THD)
RMS output power (reference):
180 W + 180 W (per channel at 12 Ω, 1 kHz)
Inputs
PC IN (stereo mini jack): Sensitivity 800 mV, impedance 22 kilohms
Outputs
SPEAKERS: Impedance 12 Ω
SUBWOOFER (MHC±EC909iP only): Impedance 12 Ω
CD player section
System: Compact disc and digital audio system
Laser Diode Properties
Emission Duration: Continuous
Laser Output*: Less than 44.6μW
from the objective lens surface on the Optical Pick±up Block
Frequency response: 20 Hz - 20 kHz
Signal±to±noise ratio: More than 90 dB
Dynamic range: More than 88 dB
Tuner section
FM stereo, FM/AM superheterodyne tuner
Antenna:
FM lead antenna
AM loop antenna
FM tuner section:
Tuning range
North American model: 87.5 MHz - 108.0 MHz (100 kHz step)
Australian model: 87.5 MHz - 108.0 MHz (50 kHz step)
Intermediate frequency: 225 kHz
AM tuner section:
Tuning range
North American model:
530 kHz - 1,710 kHz (10 kHz step)
531 kHz - 1,710 kHz (9 kHz step)
Australian model:
531 kHz - 1,710 kHz (9 kHz step)
530 kHz - 1,710 kHz (10 kHz step)
Intermediate frequency: 53 kHz
* °is output is the value measurement at a distance of 200mm
°e following measured at AC 240 V, 50/60 Hz
°e following measured at AC 120 V, 60 Hz
(°e United States model only)
with 7mm aperture.
Halogenated flame retardants are not used in the certain printed
Design and specifications are subject to change without notice.
W
W
Î
iPo
d
is
a
tra
d
e
m
ark
of
Apple
I
nc.,
re
g
istere
d
in
the
U.S.
an
d
other
countries.
Î
iPhone
is
a
tra
d
e
m
ark
of
Apple
I
nc.
Î
MPEG
Layer-3
au
d
io
co
d
in
g
technolo
g
y
an
d
patents
license
d
fro
m
Fraunhofer
II
S
an
d
°o
m
son.
Î
All
other
tra
d
e
m
arks
an
d
re
g
istere
d
tra
d
e
m
arks
are
of
their
respective
hol
d
ers.
I
n
this
m
anual,
TM
an
d
®
m
arks
are
not
specifie
d
.