Sony HDR-AS200V Help Guide - Page 64
Resol, Tcout, R.ctl
View all Sony HDR-AS200V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
press the ENTER button. 2. Press the NEXT button or PREV button to select the following setting, then press the ENTER button. RESOL: Sets the output resolution of the HDMI signal. AUTO: Sets the HDMI resolution signal automatically. 2160p (FDR-X1000V only): Sets the HDMI resolution signal to 2160p. 1080p: Sets the HDMI resolution signal to 1080p. 1080i: Sets the HDMI resolution signal to 1080i. 720p: Sets the HDMI resolution signal to 720p. BACK: Returns to the [HDMI] menu. 24/60: Sets the output HDMI signal frame rate. 60p: Output HDMI signal is 60p. 24p: Output HDMI signal is 24p. BACK: Returns to the [24/60] menu. * Available only when in movie mode (not available when playback). * This setting is disabled when VMODE is set to a setting other than 1080 24p. * This setting is disabled when the HDMI resolution is set to a setting other than 1080. TCOUT: Sends the time code or the user bit information to a device connected with HDMI. ON: Sends the time code or user bit information. OFF: Does not send the time code or user bit information. BACK: Returns to the [TCOUT] menu. * Unavailable when [V.FMT] is set to [MP4]. R.CTL: Controls the recording on a device connected with HDMI. ON: Controls the recording on the device. OFF: Does not control the recording on the device.