Sony HDWD1800 Operation Manual - Page 86

86

9-4

Items in the Extended Setup Menu

Chapter 9

Setup Menus

310

REC INHIBIT

Select the conditions under which recording is inhibited when F1 (REC INHI) is set

to “ON” in function menu page P07: E.PRESET.

ALL

:

All tape recording is inhibited.

CRASH:

Normal tape recording is inhibited. Select this setting for assemble editing.

VIDEO:

Recording of video and CTL signals is inhibited.

AUDIO:

Recording of audio and CTL signals is inhibited.

Note

When F1 (REC INHI) is set to “ON” in function menu page P07: E.PRESET, the

REC INHI indicator on the lower control panel lights. If an operation inhibited by

this item is attempted, the REC INHI indicator flashes.

311

ANALOG AUDIO EDIT

PRESET REPLACE FOR

CH1

Select how to activate edit preset of each digital audio channel (CH 1 to CH 4, and

CUE) on this unit using the analog audio preset function of the editor or remote

controller when using an editor (PVE-500, BVE-600, etc.) or a remote controller

which cannot control digital audio edit preset.

The edit preset of each digital audio channel (CH1 to CH4 and CUE) of this unit is

set to “ON” or “OFF” according to the analog audio preset specified by the editor or

remote controller.

NODEF

: No definition.

CH1:

Follow edit preset of analog channel 1.

CH2:

Follow edit preset of analog channel 2.

CH1+2:

Follow edit preset of analog channel 1 or 2. The default settings for each

item are as follows:

311:

CH1

312:

CH2

313:

NODEF

314:

NODEF

315:

NODEF

312

ANALOG AUDIO EDIT

PRESET REPLACE FOR

CH2

313

ANALOG AUDIO EDIT

PRESET REPLACE FOR

CH3

314

ANALOG AUDIO EDIT

PRESET REPLACE FOR

CH4

315

ANALOG AUDIO EDIT

PRESET REPLACE FOR

CUE

317

AUDIO EDIT MODE

Select the type of audio transition used for digital audio editing.

CUT:

Cut editing (audio discontinuity at edit point, and possible noise during

playback)

CROSS

:

Cross-fade

FI/FO:

Fade in and fade out

t:

Time set by menu item 803 “DIGITAL AUDIO FADE TIME”

318

EDIT RETRY

For two-VTR editing, and when this unit is used as the recorder. Select the

operation if the recorder was not synchronized in time.

OFF:

Editing is not carried out, and the unit stops.

ON

:

The editing is automatically retried (up to twice).

Menu items in the range 300 to 399, relating to editing operations (Continued)

Item number

Item name

Settings

IN/OUT

t

IN/OUT

t

Section	Page
Table of Contents	4
Chapter 1 Overview	6
1-1 Features	6
1-2 Example System Configuration	9
1-3 Description of the Function Menu in this Manual	10
Chapter 2 Location and Function of Parts	11
2-1 Control Panels	11
2-1-1 Upper Control Panel	12
2-1-2 Lower Control Panel	13
2-1-3 Switch Panel	22
2-2 Connector Panel	23
Chapter 3 Preparations	27
3-1 Connections to External Devices	27
3-1-1 Connections to Digital Devices	27
3-2 Reference Sync Signals	28
3-2-1 Selecting Reference Sync Signal Depending on Operational Status	28
3-2-2 Connecting Reference Signals	28
3-3 Setup	29
3-4 Superimposed Character Information	30
3-5 Cassettes	32
3-5-1 Cassette Types	32
3-5-2 Inserting and Ejecting Cassettes	32
3-5-3 Preventing Accidental Erasure of Recordings	32
Chapter 4 Recording and Playback	33
4-1 Recording	33
4-1-1 Preparations for Recording	33
4-1-2 Recording Timecode and User Bit Values	34
4-1-3 Recording Procedure	36
4-2 Playback	37
4-2-1 Preparations for Playback	37
4-2-2 Playback Procedures	37
4-2-3 DMC (Dynamic Motion Control) Playback	40
Chapter 5 Editing	43
5-1 Automatic Editing	43
5-1-1 Overview	43
5-1-2 Switch Settings	44
5-1-3 Selecting the Editing Mode	45
5-1-4 Setting Edit Points	45
5-1-5 Modifying and Deleting Edit Points	47
5-1-6 Cuing up to Edit Points and Preroll	48
5-1-7 Preview	48
5-1-8 Carrying Out Automatic Editing	49
5-2 DMC Editing	51
5-2-1 Overview	51
5-2-2 Carrying Out DMC Editing	51
5-3 Special Automatic Editing Methods	53
5-3-1 Quick Editing	53
5-3-2 Continuous Editing	53
5-3-3 Standalone Editing	53
5-3-4 Preread Editing	54
Chapter 6 Shot Mark Function	55
6-1 Overview	55
6-2 Shot Mark Operations	56
6-2-1 Reading Shot Marks	56
6-2-2 Writing Shot Marks	56
6-2-3 Shot Mark List Operations	57
6-2-4 Cuing Up to Shot Marks	59
Chapter 7 UMID Functions	60
7-1 Overview	60
7-2 Recording UMIDs	60
7-3 UMID Output and Display	62
7-3-1 UMID Output Settings	62
7-3-2 UMID Display	62
Chapter 8 Function Menu	64
8-1 Overview	64
8-1-1 Function Menu Configuration	64
8-1-2 Function Menu Operations	64
8-2 Function Menu Item List	65
8-2-1 User-Definable Function Menu Pages (P01 to P10)	65
8-2-2 Non-User-Definable Function Menu Pages (P100 to P118)	69
Chapter 9 Setup Menus	74
9-1 Setup Menu Configuration	74
9-2 Setup Menu Operations	75
9-3 Items in the Basic Setup Menu	78
9-4 Items in the Extended Setup Menu	81
Chapter 10 Maintenance and Inspection	103
10-1 Removing a Cassette when Tape Slack Occurs	103
10-2 Head Cleaning	103
10-3 Error Messages	104
10-4 Moisture Condensation	106
10-5 Regular Checks	106
10-5-1 Digital Hours Meter	106
10-5-2 Maintenance Timings	107
10-6 About the LCD	108
Appendix	109
Specifications	109
About a “Memory Stick”	116

Sony HDWD1800 Operation Manual - Page 86

CRASH, VIDEO, AUDIO, NODEF, CH1+2, CROSS, FI/FO, Item number, Item name, Settings

Page 86 highlights