Sony HT-7000DH Operating Instructions (HT-7000DH) - Page 79
Additional Information, FM tuner Video General, Area code, Power requirements
View all Sony HT-7000DH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Inputs (Digital) DVD (Coaxial) VIDEO 1, 2 (Optical) Sensitivity: - Impedance: 75 ohms Sensitivity: - Impedance: - Outputs (Analog) MD/TAPE (OUT), VIDEO 1 (AUDIO OUT) SUB WOOFER Voltage: 800 mV Impedance: 10 kohms Voltage: 2 V Impedance: 1 kohm Reproduction frequency range: 28 - 20,000 Hz Tone Gain levels ±6 dB, 1 dB step FM tuner section Tuning range 87.5 - 108.0 MHz Antenna FM wire antenna Antenna terminals 75 ohms, unbalanced Intermediate frequency 10.7 MHz AM tuner section Tuning range Models of area code U, CA With 10-kHz tuning scale: 530 - 1,710 kHz3) With 9-kHz tuning scale: 531 - 1,710 kHz3) Antenna Loop antenna Intermediate frequency 450 kHz 3)You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. While holding down TUNING MODE, press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. Video section Inputs/Outputs Video: 1 Vp-p, 75 ohms COMPONENT VIDEO: Y: 1 Vp-p, 75 ohms PB/CB/B-Y: 0.7 Vp-p, 75 ohms PR/CR/R-Y: 0.7 Vp-p, 75 ohms 80 MHz HD Pass Through General Power requirements Area code Power requirements U, CA 120 V AC, 60 Hz Power consumption Area code Power consumption U 170 W CA 230 VA Power consumption (during standby mode) 0.2 W Dimensions (w/h/d) (Approx.) 430 × 157.5 × 316 mm (16 7/8 × 6 2/8 × 12 4/8 inches) including projecting parts and controls Mass (Approx.) 8.0 kg (17 lb 11 oz) Additional Information continued 79US