Sony HT-CT550W Operating Instructions - Page 37
Enjoying Dolby Digital sound, level BASS, TREBLE
View all Sony HT-CT550W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Advanced Settings C, X, x, c, AMP MENU 1 Press AMP MENU to turn on the AMP menu. 2 Press C/X/x/c repeatedly to select the item and the setting. 3 Press AMP MENU to turn off the AMP menu. Setting the signal level of the center or subwoofer (CNT LEVEL, SW LEVEL) The sound from the center is output from the left and right speaker on the receiver. You can adjust the level and the balance of the center and subwoofer. The parameters of "CNT LEVEL" and "SW LEVEL" range from "-6" to "+6" in 1-step increments. • CNT LEVEL:Adjusts the center level. • SW LEVEL: Adjusts the subwoofer level. Enjoying Dolby Digital sound at low volume (AUDIO DRC) Compresses the dynamic range of the sound track. Useful for enjoying movies at low volume. AUDIO DRC applies to Dolby Digital, Dolby Digital Plus, and Dolby TrueHD sources. • ON: Compresses the sound in accordance with the information contained in the content. • AUTO: Compresses the sound automatically when the sound is in Dolby TrueHD format. • OFF: Sound is not compressed. Adjusting the bass and treble level (BASS, TREBLE) You can adjust the bass and treble level. The parameters of "BASS" and "TREBLE" range from "-6" to "+6" in 1-step increments. • BASS: Adjusts the bass level. • TREBLE: Adjusts the treble level. Adjusting the delay between the sound and the image (A/V SYNC) You can delay the sound using this function when the image is slower than the sound. • ON: Adjusts the difference between picture and sound. • OFF: No adjustment. Note • You may not be able to adjust the delay between sound and image perfectly using this function. Enjoying multiplex broadcast sound (DUAL MONO) You can enjoy multiplex broadcast sound when the system receives an AC-3 multiplex broadcast signal. Note • To receive an AC-3 signal, you need to connect a digital satellite tuner to the receiver with an optical cable or coaxial cable, and set the digital output mode of the digital satellite tuner to AC-3. • MAIN: Plays back only the main channel. • SUB: Plays back only the sub channel. • MAIN/SUB: Main sound is output from the left speaker and sub sound is output from the right speaker. continued 37US