Sony HT-CT80 Operating Instructions - Page 11
Installing the Bar Speaker on a wall
View all Sony HT-CT80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Getting Started Installing the Bar Speaker on a wall You can mount the Bar Speaker on a wall. Notes • Prepare screws (not supplied) that are suitable for the wall material and strength. As a plasterboard wall is especially fragile, attach the screws securely to two studs in the wall beam. Install the Bar Speaker horizontally, hung by screws in studs in a continuous flat section of the wall. • Be sure to subcontract the installation to Sony dealers or licensed contractors and pay special attention to safety during the installation. • Sony shall not be held responsible for accidents or damage caused by improper installation, insufficient wall strength, improper screw installation or natural calamity, etc. 1 Prepare screws (not supplied) that are suitable for the holes on the rear of the Bar Speaker. 2 Fasten the screws to 2 studs in the wall. The screws should protrude by 9 mm to 10 mm (approx. 3/8 in). 447 mm (17 3/5 in) 9 mm to 10 mm (approx. 3/8 in) 3 Hang the Bar Speaker on the screws. Align the holes at the rear of the Bar Speaker with the screws, then hang the Bar Speaker on the two screws. 4 mm (3/16 in) More than 30 mm (1 3/16 in) 4.6 mm (3/16 in) 9 mm (9/25 in) Hole on the rear of the Bar Speaker 11GB