Sony HT-NT5 Operating Instructions - Page 18

Mounting the Unit on a Wall You can mount the unit on a wall. 1 Fix the wall mounting brackets (supplied) to the bracket fixing holes on the bottom of the unit with the screws (supplied) so that the surface of each wall mounting bracket is as shown in the illustration. Fix the two wall mounting brackets to the left and right fixing holes on the bottom of the unit. Screw (supplied) Notes • Prepare screws (not supplied) that are suitable for the wall material and strength. As a plasterboard wall is especially fragile, attach the screws securely in the wall beam. Install the speakers horizontally, hung by screws in studs in a continuous flat section of the wall. • Have the installation done by a Sony dealer or licensed contractor and pay special attention to safety during the installation. • Sony shall not be held responsible for accidents or damage caused by improper installation, insufficient wall strength, improper screw installation or natural disaster, etc. Wall mounting brackets (supplied) 2 Prepare screws (not supplied) that are suitable for the holes on the wall mounting bracket. 4 mm (3/16 in) More than 30 mm (1 3/16 in) 4.2 mm (3/16 in) 10 mm (13/32 in) Hole on the wall mounting bracket 18US