Sony HT-S100F Operating Instructions - Page 16
When the TV Remote Control does not Work
View all Sony HT-S100F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
When the TV Remote Control does not Work When the Bar Speaker obstructs the remote control sensor of the TV, the TV remote control may not work. In that case, enable the IR repeater function of the system. You can control the TV with the TV remote control by sending the remote signal from the rear of the Bar Speaker. Press and hold STANDARD for 5 seconds to set the function to on or off. IR repeater on The USB indicator flashes twice. IR repeater off The USB indicator flashes once. Notes • Be sure to check that the TV remote control cannot control the TV, and then set the IR repeater function to on. If it is set to on when the remote control can control the TV, appropriate operation may not be obtained because of the interference between the direct command from the remote control and the command via the Bar Speaker. • On some TVs, this function may not work correctly. In this case, place the Bar Speaker slightly further away from the TV. 16US