Sony HT-S100F Operating Instructions - Page 26
Saving Power Consumption, One-Touch Play Function, Notes on HDMI Connections, Turn the System Off
View all Sony HT-S100F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Note If the TV is not compatible with Audio Return Channel, the optical digital cable (supplied) needs to be connected (refer to the supplied Startup Guide). One-Touch Play Function When you play content on a device (Bluray Disc player, "PlayStation®4," etc.) connected to the TV, the system and TV are turned on automatically, the input of the system is switched to "TV" input, and sound is output from the speakers of the system. Notes • If the TV sound was output from the speakers of the TV the previous time you watched the TV, the system does not turn on and the sound and picture are output from the TV even if device content is played. • Depending on the TV, the beginning part of content being played may not play correctly. Notes on HDMI Connections • Use an HDMI-authorized cable. • Use a Sony High Speed HDMI Cable with the Cable Type Logo. • We do not recommend using an HDMI-DVI conversion cable. • Audio signals (sampling frequency, bit length, etc.) transmitted from an HDMI jack may be suppressed by the connected device. Saving Power Consumption To use the system while saving power consumption, change the following settings. Turn the System Off by Detecting the Using State When you set the auto standby function to on, the system enters standby mode automatically when you do not operate the system for about 20 minutes and the system is not receiving an input signal. Press and hold CINEMA for 5 seconds to set the function to on or off. Auto standby on The USB indicator flashes twice. Auto standby off The USB indicator flashes once. Saving Power in Standby Mode To save power consumption during the standby mode, set the BLUETOOTH standby mode (page 24) and Control for HDMI function (page 25) to off. The default settings for them are on. 26US