Sony HT-SF470 Operating Instructions - Page 22

TV, etc. Audio/video signals A L DIGITAL EZW-T100 R AUTO AUDIO IN AUDIO IN CAL MIC SA-CD/CD TV DC5V 0.7A MAX DMPORT HDMI DVD IN COAX IN OPT IN OPT IN VIDEO SAT/CATV TV BD IN SAT/CATV IN ANTENNA AM ARC TV OUT A A A Audio/video signals Audio/video signals Audio/video signals DVD player Blu-ray Disc player Satellite tuner, cable television tuner l : Signal flow A HDMI cable (not supplied) Sony recommends that you use an HDMIauthorized cable or Sony HDMI cable. * When you use Audio Return Channel (ARC) function, the audio signal is output from the TV to the receiver. Notes • When the TV is compatible with Audio Return Channel (ARC) function, the TV sound will automatically output from the speakers connected to the receiver. If not, see page 19 for the audio connection of TV to the receiver. Be sure to set "ARC" to "ARC ON" in SET HDMI menu (page 45). • All the HDMI jacks on the receiver function in the same way. For example, you can connect a "PlayStation 3" etc., to any available HDMI jack. Notes on HDMI connections • An audio signal input to the HDMI IN jack is output from the SPEAKERS jacks and HDMI OUT jack. It is not output from any other audio jacks. • Video signals input to the HDMI IN jack can only be output from the HDMI OUT jack. • The multi/stereo area audio signals of a Super Audio CD are not output. • Audio signals (sampling frequency, bit length, etc.) transmitted from an HDMI jack may be suppressed by the connected component. Check the setup of the connected component if the image is poor or the sound does not come out of a component connected via the HDMI cable. • Sound may be interrupted when the sampling frequency, the number of channels or the audio format of the audio output signals from the playback component is switched. • When the connected component is not compatible with copyright protection technology (HDCP), the image and/or the sound from the HDMI OUT jack may be distorted or may not be output. In this case, check the specification of the connected component. • You can enjoy multi channel Linear PCM only with an HDMI connection. • Set the image resolution of the playback component to 720p, 1080i or 1080p when you output 96 kHz multi channel sound over an HDMI connection. • You may need to make certain settings on the image resolution of the player before you can enjoy multi channel Linear PCM. Refer to the operating instructions of the player. • Refer to the operating instructions of each component connected for details. • Not every HDMI component supports all functions that are defined by the specified HDMI version. For example, components that support HDMI, version 1.4, may not support Audio Return Channel (ARC). 22US