Sony HT-SF470 Operating Instructions - Page 28
When error codes appear, When you select WRN CHECK, When you select DIST INFO or, LEVEL INFO - surround sound system
UPC - 027242792869
View all Sony HT-SF470 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
When error codes appear Try the remedies and perform the Auto Calibration again. Error code Cause and remedies ERROR 32 • The sound received by the optimizer microphone is out of the acceptable range. • The optimizer microphone or subwoofer may be damaged. Contact your Sony dealer or local authorized Sony service facility. ERROR F 33 The front speakers are not connected or either the front left or front right speaker is not connected. Check that the front speakers are connected properly. ERROR SR33 Either the surround left or surround right speaker is not connected. Check that the surround speakers are connected properly. ERROR SW33 The subwoofer is not connected or it may be damaged. Contact your Sony dealer or local authorized Sony service facility. When you select "WRN CHECK" If a warning on the measurement result is present, detailed information is displayed. Press or B to return to step 2 of "Confirming/saving the measurement results". Warning code Explanation WARNING 40 The Auto Calibration has completed. However, the noise level is high. You may be able to perform the Auto Calibration properly if you try it again, even though the measurement cannot be performed in all environments. Try to perform the Auto Calibration in a quiet environment. Warning code Explanation WARNING 41 WARNING 42 The sound received by the optimizer microphone is out of the acceptable range. The distance between the optimizer microphone and the speakers is too close. Set them away, and then try to perform the Auto Calibration again. WARNING 43 The distance and position of the subwoofer cannot be detected. This may be caused by noise. Try to perform the Auto Calibration in a quiet environment. NO WARNING There is no warning information. When you select "DIST INFO" or "LEVEL INFO" You can check the speaker distance or speaker level. Note The measurement result of a speaker will not appear if the receiver does not recognize that the speaker is connected. When you have finished Disconnect the optimizer microphone from the receiver. Note If you have changed the position of the speakers, it is recommended that you perform Auto Calibration again in order to enjoy the surround sound. 28US