Sony HVR-M15AU Operating Instructions - Page 21

Chapter 2 Playback and Recording Checking the tape for slack Using a paper clip or a similar object, turn the reel gently in the direction shown by the arrow. If the reel does not move, there is no slack. Paper clip, etc. HVR-M15A (rear panel) To DC IN jack AC Adaptor (supplied) Reel Preparing the Power Supply Connect the power cord (supplied) to the AC Adaptor (supplied) and the DC plug of the AC Adaptor to DC IN jack on the unit. Then, connect the power plug to the wall outlet. When you disconnect the power code from the wall outlet, be sure to unplug the power plug from the wall outlet first. PRECAUTION Even if this unit is turned off, AC power (house current) is still supplied to it while connected to the wall outlet via the AC Adaptor. Notes • Never short-circuit the DC plug of the AC Adaptor with a metal object. A short circuit can damage the unit. • Use a nearby wall outlet when using the AC Adaptor. Disconnect the AC Adaptor from the wall outlet immediately if any malfunction occurs. • Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture. To a wall outlet Power cord (supplied) The [CLOCK SET] screen appears when you turn on the unit for the first time. For details on [CLOCK SET],see page 58. Inserting/Ejecting Cassettes To insert a cassette Notes • Do not insert the cassette forcibly. The unit may be damaged. • Do not eject/load the cassette in a place subject to light. Close the cassette lid when the unit is in use. The internal sensor of the unit may operate incorrectly if too much light falls on the unit. 1 With the unit powered on, confirm that q indicator is off, and then open the cassette lid. (Continued) 21 Chapter 2 Playback and Recording