Sony HWSBTA2W Operating Instructions - Page 22
Initializing this unit, Common - stereo bluetooth r transmitter & receiver
UPC - 027242695054
View all Sony HWSBTA2W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Distorted sound , Turn down the volume of the stereo audio source device to the point where the sound is no longer distorted. For details on volume adjustment, refer to the operating instructions supplied with the stereo audio source device. , If the AUDIO IN jack of this unit is connected to the LINE OUT jack of the stereo audio source device, connect it to the headphone jack. Be sure to connect this unit to the headphone jack of the stereo audio source device to be connected. If this unit is connected to the LINE OUT jack of the device to be connected, sound may be distorted. Cannot be connected to a device that has been paired and connected before. , When using this unit as a transmitter, this unit tries to connect with either of the last two devices recognized before. If this unit cannot make the BLUETOOTH connection with a paired device, pair the device again, or try making the BLUETOOTH connection from the BLUETOOTH stereo audio receiving device if possible. , Pairing information may be deleted. Pair the device again. Common Sound skips or the correspondence distance is short. , If a device that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device(s), or a microwave oven is nearby, move away from such sources. , Remove any obstacle between this unit and other BLUETOOTH device or move away from the obstacle. , Locate this unit and other BLUETOOTH device(s) as near as possible. , Re-position this unit. , Re-position other BLUETOOTH device. Pairing cannot be done. , Bring this unit and the BLUETOOTH device closer together. Sound is delayed. , If you watch a TV or a DVD through BLUETOOTH connection via this unit, sound may lag behind the picture. 22 US Initializing this unit You can reset this unit to its default and delete all pairing information. 1 If this unit is turned on, press the 1 button to turn off this unit. 2 While holding the 1 button, press the ID SET button for 7 seconds or more. The 1 indicator (green) and the indicator (blue) flash four times, and this unit is reset to the default setting. All pairing information is deleted.