Sony ICD-PX470 Help Guide Printable PDF - Page 212

List of messages, Built-In Memory Needs to be Formatted / SD Card Needs to be Formatted

Page 212 highlights

Help Guide IC Recorder ICD-PX470 List of messages HOLD... Slide HOLD Switch to Activate. All the buttons are disabled because your IC recorder is in the HOLD state to prevent unintentional operations. Slide the HOLD•POWER switch to the center dot to release the IC recorder from the HOLD state. (See Releasing the IC recorder from the HOLD state.) Low Battery Level You cannot format the memory or delete all the files in a folder because of insufficient battery power. Replace the batteries (size AAA) with new ones. (See Inserting batteries.) Low Battery Your IC recorder does not work because its batteries have worn out. Replace the batteries (size AAA) with new ones. (See Inserting batteries.) SD Card Error An error was detected when you inserted a microSD card into the microSD card slot. Remove the microSD card and insert it once again. If this message keeps appearing, use a new microSD card. The microSD card is write-protected. You inserted a read-only microSD card. You cannot use the read-only microSD card on your IC recorder. Memory Full The remaining capacity of the built-in memory or the microSD card is insufficient. Delete some files and repeat the recording once again. (See Deleting a file.) File Full The sum of folders and files or the total number of files has reached the limit. You cannot create any more files. Delete some files and create the file once again. (See Deleting a file.) Track Marks are Full The number of track marks has reached the limit. You cannot add any more track marks. Delete some unnecessary track marks. (See Deleting a track mark.) Built-In Memory Needs to be Formatted / SD Card Needs to be Formatted 199

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217

Help Guide
IC Recorder
ICD-PX470
List of messages
HOLD... Slide HOLD Switch to Activate.
All the buttons are disabled because your IC recorder is in the HOLD state to prevent unintentional operations. Slide the
HOLD•POWER switch to the center dot to release the IC recorder from the HOLD state.
(See
Releasing the IC recorder from the HOLD state
.)
Low Battery Level
You cannot format the memory or delete all the files in a folder because of insufficient battery power. Replace the batteries (size
AAA) with new ones.
(See
Inserting batteries
.)
Low Battery
Your IC recorder does not work because its batteries have worn out. Replace the batteries (size AAA) with new ones.
(See
Inserting batteries
.)
SD Card Error
An error was detected when you inserted a microSD card into the microSD card slot. Remove the microSD card and insert it
once again. If this message keeps appearing, use a new microSD card.
The microSD card is write-protected.
You inserted a read-only microSD card. You cannot use the read-only microSD card on your IC recorder.
Memory Full
The remaining capacity of the built-in memory or the microSD card is insufficient. Delete some files and repeat the recording once
again.
(See
Deleting a file
.)
File Full
The sum of folders and files or the total number of files has reached the limit. You cannot create any more files. Delete some files
and create the file once again.
(See
Deleting a file
.)
Track Marks are Full
The number of track marks has reached the limit. You cannot add any more track marks. Delete some unnecessary track marks.
(See
Deleting a track mark
.)
Built-In Memory Needs to be Formatted / SD Card Needs to be Formatted
199