Sony ICD-PX512 Operating Instructions - Page 132
Message, Cause/Remedy, Track Marks are Full
View all Sony ICD-PX512 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Message File Damaged Format Error Process Error Stop and Reinsert Memory Card Advise to not listen at high VOL for long periods Set Date&Time Track Marks are Full No File No Track Marks Low Battery Level Cause/Remedy • You cannot play back or edit files, because the data of the selected file is damaged. • The IC recorder cannot be turned on using the computer because there is no copy of the control file required for operation. Format the IC recorder using the formatting function in the menu (page 91). Do not use your computer to format the IC recorder. • The IC recorder failed in memory access. Remove and then reinsert the battery. • Save a backup copy of your data and format the IC recorder using the menu (page 91). • A memory card was inserted during recording or playback. Remove the memory card and insert it while the IC recorder is in the stop mode. • "AVLS" in the menu is set to "OFF." Please be careful not to listen at an excessive volume. • Set the clock; otherwise, you cannot set the alarm. • You can set up to 98 track marks for a file. Cancel unwanted track marks (page 61). • The selected folder does not have any files. You cannot move a file or set the alarm, etc., because of this. • There are no track marks when you attempt to erase a track mark or track marks, or divide a file at all the track mark positions. • You cannot format the memory or erase all the files in a folder because of insufficient battery power. Replace the old LR03 (size AAA) alkaline battery with a new one. Or charge the rechargeable battery (page 12) or replace the old rechargeable battery with a new one. 132GB