Sony ICD-PX512 Operating Instructions - Page 94
An Ic Recorder Or Memory
View all Sony ICD-PX512 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
1 Slide the USB slide lever on the back of the IC recorder, and insert the USB DIRECT connector into the USB port of a running computer. 2 Make sure the IC recorder has been recognized properly. On the Windows screen; open "My Computer" or "Computer," and make sure that "IC RECORDER" or "MEMORY CARD" has been recognized. On the Macintosh screen; make sure that an "IC RECORDER" or "MEMORY CARD" drive is displayed on the desktop. The IC recorder is recognized by the computer as soon as the connection is made. While the IC recorder is connected to the computer, "Connecting" is displayed in the display window of the IC recorder. If the IC recorder cannot be connected to a computer directly, use the supplied USB connection support cable. USB connection support cable (supplied) P Notes • If you connect more than two USB devices to your computer, normal operation will not be guaranteed. • Use of this IC recorder with a USB hub or a USB cable other than the supplied USB connection support cable is not guaranteed. • A malfunction may occur depending on the USB devices connected at the same time. • Before connecting the IC recorder to your computer, check that the battery is inserted in the IC recorder. • It is recommended that you disconnect the IC recorder from the computer when you are not using the IC recorder connected to the computer. 94 GB