Sony ILCE-6500 Help Guide Printable PDF - Page 183

[161] Viewing Viewing images Playing back still images Plays back the recorded images. 1 Press the (Playback) button to switch to the playback mode. 2 Select the image with the control wheel. Hint The product creates an image database file on a memory card to record and play back images. An image that is not registered in the image database file may not be played back correctly. To play back images shot using other devices, register those images to the image database file using MENU → (Setup) → [Recover Image DB]. If you play back the images right after continuous shooting, the monitor may display an icon indicating that data is being written/the number of images left to write. During writing, some functions are not available. You can also enlarge an image by double-tapping the monitor. In addition, you can drag and move the magnified position on the monitor. Set [Touch Operation] to other than [Off] beforehand. [162] Viewing Viewing images Enlarging an image being played back (Playback zoom) Enlarges the image being played back. Use this function to check the focus of the image, etc. 1 Display the image you want to enlarge, and then press the button. Turn the control wheel to adjust the zoom scale. By rotating the control dial, you can switch to the previous or next image while keeping the same zoom scale. The view will zoom in on the part of the image where the camera focused during shooting. If the focus location information cannot be obtained, the camera will zoom in on the center of the image.