Sony ILCE-6500 Help Guide Printable PDF - Page 246
Wi-Fi Settings: Access Point Set.
View all Sony ILCE-6500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 246 highlights
If your access point has the Wi-Fi Protected Setup (WPS) button, you can register the access point to this product easily by pushing the Wi-Fi Protected Setup (WPS) button. 1 MENU → (Wireless) →[Wi-Fi Settings] → [WPS Push]. 2 Press the WPS button on the access point you want to register. Note [WPS Push] works only if the security setting of your access point is set to WPA or WPA2 and your access point supports the Wi-Fi Protected Setup (WPS) button method. If the security setting is set to WEP or your access point does not support the Wi-Fi Protected Setup (WPS) button method, perform [Access Point Set.]. For details about the available functions and settings of your access point, see the access point operating instructions or contact the administrator of the access point. A connection may not be enabled depending on the surrounding conditions, such as the type of wall material or if there is an obstruction or poor wireless signal between the product and access point. If that happens, change the location of the product or move the product closer to the access point. [244] Using wireless functions Changing the wireless connection settings Wi-Fi Settings: Access Point Set. You can register your access point manually. Before starting the procedure, check the SSID name of the access point, security system, and password. The password may be preset in some devices. For details, see the access point operating instructions, or consult the access point administrator. 1 MENU → (Wireless) → [Wi-Fi Settings] → [Access Point Set.]. 2 Select the access point you want to register.