Sony ILCE-9 Help Guide Printable PDF - Page 214

When shooting, the sound of the shoulder strap hooks (triangular hook) could be recorded, depending on the situation used. To prevent the operating sound of the zoom ring from being recorded during movie recording when a power zoom lens is used, we recommend recording movies using the zoom lever. When you move the zoom lever, place your finger lightly on the lever and operate it without flicking. The temperature of the camera tends to rise when shooting movies continuously, and you may feel that the camera is hot. This is not a malfunction. Also, [Internal temp. high. Allow it to cool.] may appear. In such cases, turn the camera off and wait until the camera is ready to shoot again. If the icon appears, the temperature of the camera has risen. For the continuous shooting time of a movie recording, refer to "Recordable movie times." When movie recording is finished, you can restart recording by pressing the MOVIE button again. Recording may stop to protect the product, depending on the temperature of the product or the battery. When the mode dial is set to (Movie) or or when shooting movies, you cannot select [Lock-on AF] for [Focus Area]. In [Program Auto] mode when shooting movies, the aperture value and the shutter speed will be set automatically and cannot be changed. For that reason, the shutter speed may become fast in a bright environment, and the motion of the subject may not record smoothly. By changing the exposure mode and adjusting the aperture value and the shutter speed, the motion of the subject can be recorded smoothly. In movie shooting mode, ISO sensitivity can be selected from ISO 100 to ISO 102400. If the ISO value is set to a value smaller than ISO 100, the setting is automatically switched to ISO 100. When you finish recording the movie, the ISO value returns to the original setting. In movie shooting mode, the following settings cannot be set in [Picture Effect]. When a movie recording starts, [Off] will be set temporarily. Rich-tone Mono. If you point the camera at an extremely strong light source while shooting a movie at low ISO sensitivity, the highlighted area in the image may be recorded as a black area. If the display mode of the monitor is set to [For viewfinder], the display mode will switch to [Display All Info.] when movie shooting starts. Use PlayMemories Home when importing XAVC S movies, AVCHD movies, and MP4 movies to a computer. Related Topic MOVIE Button Movie w/ shutter File Format (movie) Angle of view during movie recording Recordable movie times Custom Key(Shoot.)/Custom Key(PB) Focus Area 4-691-927-11(1) Copyright 2017 Sony Corporation 214