Sony ILCE-9 Help Guide Printable PDF - Page 581
Cleaning Mode]
View all Sony ILCE-9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 581 highlights
Help Guide Interchangeable Lens Digital Camera ILCE-9 α9 Cleaning Mode If dust or debris gets inside the camera and adheres to the surface of the image sensor (the part that converts the light to an electric signal), it may appear as dark spots on the image, depending on the shooting environment. If this happens, follow the steps below to clean the image sensor. 1 Confirm that the battery has been charged sufficiently. 2 MENU → (Setup) → [Cleaning Mode] → [Enter]. The image sensor vibrates a little to shake off the dust. 3 Turn off the product following the instructions on the screen. 4 Detach the lens. 5 Use the blower to clean the image sensor surface and the surrounding area. 6 Attach the lens. Hi n t For how to check the amount of dust on the image sensor, and for further details on cleaning methods, please refer to the following URL. http://support.d-imaging.sony.co.jp/www/support/ilc/sensor/index.php Note Clean the image sensor quickly. A blower is not supplied with this product. Use a commercially available blower. Make sure that the remaining battery level is AC adaptor (supplied) is recommended. (3 remaining battery icons) or more, before performing the cleaning. The use of Do not use a spray type blower as it may scatter water droplets inside the camera body. 581