Sony IP7BT Operating Instructions - Page 137

"Memory Stick" Operations Viewing a still image - Memory photo playback - DCR-IP7BT only You can play back still images recorded on a "Memory Stick." You can also play back six images (including moving pictures) in order at a time by selecting the index screen. Before operation Insert the "Memory Stick" into your camcorder. (1) Set the POWER switch to MEMORY or VCR. (2) In MEMORY mode, select PLAY, then press the center z on the control button. In VCR mode, select PB, then press the center z on the control button. The last recorded image is displayed. (3) Select -/+, then press the center z on the control button to select the desired still image. - : to see the previous image +: to see the next image 2 PLAY 1 CAMERA MEMORY/ NETWORK VCR POWER (CHG) OFF ON MODE To stop memory photo playback Select CAM or VCR, then press the center z on the control button. Note Playback images recorded on the "Memory Stick" are not output: •From the i.LINK (MICROMV) jack. •From the A/V jack if the i.LINK cable is plugged into the camcorder. Notes on file names •The directory number may not be displayed and only the file name may be displayed if the structure of the directory does not conform to the DCF standard. •" - DIRECTORY ERROR" may appear on the screen if the structure of the directory does not conform to the DCF standard. While this message appears, you can play back images but cannot record them on the "Memory Stick." •The file name flashes on the screen if the file is corrupted or if the file is unreadable. 137