Sony IP7BT Operating Instructions - Page 170
Self-diagnosis display
![]() |
UPC - 027242597921
View all Sony IP7BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 170 highlights
Self-diagnosis display Your camcorder has a self-diagnosis display function. This function displays the current condition of your camcorder as a 5-digit code (a combination of a letter and figures) on the screen. If a 5-digit code is displayed, check the following code chart. The last 2 digits (indicated by ss) will differ depending on the state of your camcorder. LCD screen or Viewfinder C:21:00 Self-diagnosis display •C:ss:ss You can service your camcorder yourself. •E:ss:ss Contact your Sony dealer or local authorized Sony facility. Five-digit display C:04:ss C:21:ss C:22:ss C:31:ss C:32:ss E:61:ss Cause and/or Corrective Actions • You are using a battery pack that is not an "InfoLITHIUM" battery pack. c Use an "InfoLITHIUM" battery pack. • Moisture condensation has occurred. c Remove the cassette and leave your camcorder for at least 1 hour to acclimatize it (p. 179). • The video heads are dirty. c Clean the heads using the cleaning cassette (p. 180). • A malfunction other than the above that you can service has occurred. c Remove the cassette and insert it again, then operate your camcorder. c Disconnect the power cord of the AC adaptor or remove the battery pack. After reconnecting the power source, operate your camcorder. • A malfunction that you cannot service has occurred. c If the same code appears again after you remove and attach the power source, contact your Sony dealer or local authorized Sony service facility and inform them of the 5-digit code. (example: E:61:10) If you are unable to rectify the problem even if you try corrective actions a few times, contact your Sony dealer or local authorized Sony service facility. 170
![](/manual_guide/products/sony-ip7bt-operating-instructions-c612c42/170.png)