Sony JH1 Product Manual (JH1 / JH3 manual) - Page 50
Specifications
View all Sony JH1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Specifications Digital video system HD analog response (BNC output) Output level Y: 700 mV (±5%) Pb/Pr: ±350 mV (±5%) Sync signal: ±300 mV (added to Y component) (±5%) Frequency response Y: 0 to 20 MHz +1.0 dB/-3.0 dB Pb/Pr: 0 to 7 MHz +1.0 dB/-3.0 dB S/N 56 dB or more Output impedance Y, Pb, Pr: 75 Ω (± 5%) Y/C Delay Y, Pb/Pr: ±15 nS or less SD composite response (Down-converter output) Output level Y: 59.94i; 714 mV (±5%) 50i; 700 mV (±5%) Sync: 59.94i; 286 mV (±5%) 50i; 300 mV (±5%) Burst: 59.94i; 286 mV (±5%) 50i; 300 mV (±5%) Frequency response 0.5 to 5.75 MHz +0.5 dB/-3.0 dB S/N 53.5 dB or more K-Factor 1.0% or less Y/C Delay 20 nS or less HD analog response (VGA output) Output level R: 700 mV (±5%) G: 700 mV (±5%) B: 700 mV (±5%) Resolution XGA Refresh/rate J-H3: 60 Hz/50 Hz/48 Hz J-H1: 60 Hz/50 Hz H-Frequency J-H3: 48.4 kHz/40.3 kHz/38.7 kHz J-H1: 48.4 kHz/40.3 kHz HD analog response (D connector; complies with EIAJ CP-4120) Output level Y: 700 mV (±5%) Pb/Pr: ±350 mV (±5%) Sync signal: ±300 mV (added to Y component) (±5%) Frequency response Y: 0 to 20 MHz +1.0 dB/-3.0 dB Pb/Pr: 0 to 7 MHz +1.0 dB/-3.0 dB S/N 56 dB or more Output impedance Y, Pb, Pr: 75 Ω (±5%) Y/C Delay Y, Pb/Pr: ±15 nS or less Analog audio system Analog audio response Output level XLR: +4 ±0.5 dBm, -20 dBFS, 600 Ω terminated PIN: -10 ±0.5 dBu, -20 dBFS, 47 kΩ terminated Frequency response 20 Hz to 20 kHz +1.0 dB/-1.5 dB, Emphasis OFF Ref:1 kHz Dynamic range 85 dB or more, Emphasis ON at 1 kHz Distortion 0.1% or less, Emphasis ON at 1 kHz/-20 dBFS Wow and flutter Below measurable level Cue audio response Frequency response 100 Hz to 10 kHz ±3.0 dB, Ref: 1 kHz/-10 dB S/N 43.5 dB or more DIN AUDIO RMS, 3% distortion Distortion (THD) 2% or less, at 1 kHz/0 VU Wow and flutter 0.18% or less, JIS weighted Output connectors HDSDI OUTPUT (J-H3 only) BNC (1), Including character superimposition Serial digital (1.485 Gbits/second) SMPTE 292M SDI OUTPUT (J-H3 only) BNC (1), Including character superimposition Serial digital (270 Mbits/second) SMPTE 259M i.LINK (available only when an HKJ-101 i.LINK Interface Board is installed) IEEE1394 (1), 6-pin COMPOSITE VIDEO OUTPUT BNC (1), Phono jack (1) Including character superimposition 1.0 Vp-p, 75 Ω, Sync negative ANALOG HD COMPONENT VIDEO OUTPUT BNC (3), Including character superimposition Y: 1.0 Vp-p, Sync negative, 75 Ω, unbalanced Pb/Pr: 0.7 Vp-p, 75 Ω, unbalanced A-2 Appendix Appendix