Sony KD-70X690E Operating Instructions - Page 45

A message appears stating that the TV cannot connect to your network  Check the current network settings. Press HOME, then select [Settings]  [Preferences]  [Setup]  [Network]  [Network Setup]  [Network Status]. If all of your network settings are "-", your server may not be connected properly. Check your network connections and/or server's instruction manual for connection information.  Reconfigure your network settings.  If the LAN cable is connected to an active server and the TV has acquired an IP address, check your DLNA Certified™ media server's connections and configurations. Note • Your IP address configuration can be viewed by selecting the [Network Status] option. DLNA Certified™ media server is inaccessible although it is listed under [Media] in the Home Menu  Check your LAN cable/connection or your server connections. The TV may have lost connection with the server.  Perform [Media Server Troubleshooting] to check if your media server is properly communicating with the TV. Press HOME, then select [Settings]  [Preferences]  [Setup]  [Network]  [Home Network Setup]  [Media Server Troubleshooting]. When using the renderer function, music files cannot be played back  Some applications display a photo file preinstalled in the PC simultaneously with music playback when using the renderer function. Depending on the pre-installed photo file, music playback may not be possible, but may become possible by changing the photo file. You could not connect Internet  Check that the LAN cable or AC power cord of the router/modem* has been connected properly. * Your router/modem must be set in advance to connect to the Internet. Contact your Internet service provider for router/modem settings. You do not have YouTube ID  If you do not have a YouTube ID and password, register them through the address below. http://www.google.com/device (You can also register a YouTube ID and password from your PC.) After registering your ID, you can use it immediately. General US The TV turns off automatically (the TV enters standby mode)  Check if the [Sleep Timer] is activated (page 30).  Check if the [Duration] is activated by [On Timer] (page 30) or [Photo Frame Settings] (page 28).  Check if the [Idle TV Standby] is activated (page 32). Some input sources cannot be selected  Select [Manage Inputs] and select [Always] of the input source (page 30). The remote control does not function  Replace the batteries. HDMI equipment does not appear on BRAVIA Sync Device List  Check that your equipment is compatible with BRAVIA Sync Control. Cannot select Off in BRAVIA Sync Control  If you have connected any audio system that is compatible with BRAVIA Sync Control, you cannot select [Off] in this menu. To change the audio output to the TV speaker, select [TV Speakers] in the [Speakers] menu (page 30). The Parental Lock password has been forgotten  Enter 4357 for the password.  Update password by selecting [Settings]  [Preferences]  [Parental Lock]  [Change Password]. Store Display Mode or Promoting Feature Logo appears on the screen  On the remote control, press RETURN then press HOME and select [Settings]  [Preferences]  [Setup]  [Initial Setup]. Be sure to select [Home] in [Location]. 45US