Sony KDL-32BX300 Operating Instructions - Page 7

Getting Started Locating Inputs and Outputs Rear Panel 123 4 5 AUDIO VIDEO IN CABLE/ ANTENNA DIGITAL AUDIO OUT (OPTICAL) COMPONENT IN (1080p/1080i/ 720p/480p/480i) 1 R L (MONO) AUDIO PR 2R L PC IN AUDIO PC/HDMI 1 AUDIO IN 1 2 IN PB Y RGB AUDIO R L AUDIO OUT (FIX) SERVICE ONLY 67 8 Item Description 1 DIGITAL AUDIO Connects to the optical audio input of digital audio equipment that is PCM/Dolby* OUT (OPTICAL) Digital compatible. 2 CABLE/ ANTENNA RF input that connects to your Cable or VHF/UHF antenna. 3 COMPONENT Component video provides better picture quality than the composite video. IN 2 Audio connection is required for the COMPONENT IN ports, connect audio (L/R). (1080p/1080i/ 720p/480p/480i)/ R-AUDIO-L 4 VIDEO IN/ This input port can be used as a composite video input (VIDEO) or as a component COMPONENT video input (COMPONENT 1). For composite use, connect the yellow jack to Y for IN 1 video and use audio L (mono) and R for audio signal. For component connection, (1080p/1080i/ use Y, PB, PR for video signals and also connect the audio L (mono) and R for audio 720p/480p/480i)/ signal. R-AUDIO-L (MONO) This TV can auto detect and switch between the VIDEO and COMPONENT 1 when VIDEO or COMPONENT 1 is connected. To set to auto detection, press MENU, then select the Setup settings. Select the Video/Component 1 Selection option then set to Auto. * Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. (Continued) 7