Sony KDL-37NL140 Operating Instructions - Page 6
Securing the TV, Prevent the TV from Toppling, Recommended Measures to Secure the TV
View all Sony KDL-37NL140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
3 Install the TV unit to the Table-Top Stand by aligning the end of the concave section of the TV unit to the metal neck of the Table-Top Stand. ~ • When you carry the TV unit, place your hands as illustrated on page 5 and hold it securely. Do not put stress on the LCD panel and the frame around the screen. • Be careful to not pinch your fingers or the AC power cord when you install the TV unit to the Table-Top Stand. 4 Stabilize the TV unit and the Table-Top Stand with the supplied 4 screws. Securing the TV Sony strongly recommends taking measures to prevent the TV from toppling over; as unsecured TVs may topple and result in property damage, serious bodily injury or even death. Prevent the TV from Toppling s Secure the TV to a wall and/or stand. s Do not allow children to play or climb on furniture and TV sets. s Avoid placing or hanging items on the TV. s Never install the TV on: • slippery, unstable and/or uneven surfaces. • furniture that can easily be used as steps, such as a chest of drawers. s Install the TV where it cannot be pulled, pushed, or knocked over. s Route all AC power cords and connecting cables so that they are not accessible to children. Recommended Measures to Secure the TV 1 Secure the stand for the TV. If you use a Sony TV Stand (not supplied), make sure the TV stand can adequately support the weight of the TV. Use two angle braces (not supplied) to secure the stand. For each angle brace use the appropriate hardware to: • attach one side of the angle brace to the wall stud. • attach the other side to the TV stand. Angle brace Stand ~ • If you use an electric screwdriver, set the torque for tightening at approximately 1.5 N·m {15Kgf·cm}. 6