Sony KDL-46EX710 Setup Guide (Operating Instructions) - Page 11
Organizing the AC power cord, Running initial setup, Initial, Setup, ENERGY SAVING, SWITCH, POWER - stand
UPC - 027242807990
View all Sony KDL-46EX710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Setting up your TV 3 Anchor the TV to the Wall Anchor the TV to the wall by using bolts, wall anchor and chain (or rope). ~ • Your TV is shipped with screws attached to the rear of the TV. (They are fastened in the screw holes for wall mounting.) Be sure to remove the upper two screws prior to anchoring the TV on a wall. (Except KDL-46EX713/46EX711/ 46EX710/40EX713/40EX710/32EX710 models) • Securing the TV to the stand without securing the TV and the stand to the wall provides minimum protection against the TV toppling over. For further protection, be sure to follow the three measures recommended. Anchor bolts (not supplied) Wallmount holes Rope or chain (not supplied) Wall-anchor (not supplied) Running initial setup POWER 1 Complete your cable connections before proceeding with the Initial Setup. Connect the TV to your nearest power outlet. 2 Check the ENERGY SAVING SWITCH setting is on (z). 3 Press POWER on the TV. When you switch the TV on for the first time, the Language menu appears on the screen. Organizing the AC power cord 4 Follow the instructions on the screen. ~ • The ENERGY SAVING SWITCH must be on (z) to set the clock and obtain program information for the TV Guide. • Home mode sets the TV to display the settings optimized for home viewing (this setting is ENERGY STAR compliant). 5 Select Continue to scan for available channels and enable the TV Guide On Screen® feature. If you receive channels from a cable box or satellite receiver and do not wish to use the TV's built-in tuner, select Skip. Selecting Skip will disable the TV Guide On Screen feature, which is only available when the TV's tuner is used. ~ • If you skip the channel scan while in the setup menus, TV Guide will be disabled. 11