Sony KDL-55W650D Operating Instructions Setup Guide - Page 8
Recommended Measures to Secure the TV, two angle braces not supplied
View all Sony KDL-55W650D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Recommended Measures to Secure the TV Consider the following measures when securing your TV to a Stand (not supplied). 1 Secure the Stand for the TV. Make sure the Stand can adequately support the weight of the TV. Use two angle braces (not supplied) to secure the Stand. For each angle brace use the appropriate hardware to: Attach one side of the angle brace to the wall stud. Attach the other side to the Stand. Angle braces (not supplied) Stand Screw hole of the TV Machine screw (not supplied) 2 Secure the TV to the Stand. Use the optional hardware listed as follow (not supplied): M6 machine screws (not supplied). A screw or similar (attach it to the Stand). Rope or chain (strong enough to support the weight of the TV). Make sure that there is no excess slack in the rope or chain. Rope or chain (not supplied) Screw (not supplied) The length of the M6 machine screw differs depending on the rope or chain diameter. Please refer to below illustration. 12 mm - 15.5 mm Screw M6 Rope or chain TV 8US