Sony KDL32L4000 Operating Instructions - Page 37
Preparation for Wall Mounting, Sony Wall-Mount, Bracket Model, SU-WL500 - wall bracket
UPC - 027242738126
View all Sony KDL32L4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Other Information Preparation for Wall Mounting This TV can be installed on a wall by using a Wall-Mount Bracket (sold separately). Before mounting the TV on a wall, the Table-Top Stand must be removed from the TV. Do not remove the Table-Top Stand for any reason other than to wallmount the TV. Sony Wall-Mount Bracket Model SU-WL500 Follow the simple steps below to remove the Table-Top Stand: 1 Disconnect all the cables from the TV. 2 Secure the Mounting Hook to the rear of the TV. 3 Adjust the angle of the Mounting Hook. 4 Start removing the screws behind the TV (See illustration below). Do not remove any other screws from the TV. 5 When screws are removed, lift the TV off the stand. Make sure that you carry out this task with at least two people. Do not attempt to lift the TV by yourself. For bracket installation, refer to the instruction guide provided by the WallMount Bracket model for your TV. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV's weight. For product protection and safety reasons, Sony strongly recommends that you use the Wall-Mount Bracket model designed for your TV and the wall-mounting of your TV should be performed by Sony dealers or licensed contractors. Other Information Table-Top Stand Be sure to store the removed screws and Table-Top Stand in a safe place until you are ready to reattach the Table-Top Stand. Keep the screws away from small children. 37