Sony KF50XBR800 Operating Instructions - Page 88
Other Information, Problem, Possible Remedies, Color, Cable, Auto Program, FUNCTION, SAT/CABLE - problems
UPC - 027242616028
View all Sony KF50XBR800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Other Information Problem Possible Remedies No color ❏ Adjust the Color settings in the Video menu (see page 67). Only snow and noise appear on the screen ❏ Check the Cable setting in the Channel menu (see "Cable" on page 73). ❏ Check the antenna/cable connections. ❏ Make sure the channel is broadcasting programs. ❏ Press ANT to change the input mode (see page 47). Dotted lines or stripes ❏ Adjust the antenna. ❏ Move the LCD projection TV away from noise sources such as cars, neon signs, or hair-dryers. LCD projection TV is fixed to ❏ Use Auto Program in the Channel menu to add receivable channels that are not one channel presently in TV memory (see page 73). ❏ Check your Channel Fix settings (see page 73). Double images, ghosts, or merged colors ❏ Use a highly directional outdoor antenna or a cable (when the problem is caused by reflections from nearby mountains or tall buildings). ❏ Set the Image Revision to an appropriate value. The default setting is Auto. If ghosts, doubled images, or merged colors appear with Auto, select the best value from 0 to 3 (see page 81). Cannot operate menu ❏ If the item you want to choose appears in gray, you cannot select it. ❏ Turn the LCD projection TV's power off and on again. Cannot receive any channels when using cable TV ❏ Use Auto Program in the Channel menu to add receivable channels that are not presently in TV memory (see page 73). ❏ Check your cable settings. ❏ Make sure Cable is set to ON in the Channel menu (see page 73). Cannot gain enough volume when using a cable box ❏ Increase the volume of the cable box using the cable box's remote control. Then press FUNCTION until the TV indicator lights up and adjust the LCD projection TV's volume. Channel Index does not display ❏ Make sure Cable is set to ON in the Channel menu (see "Cable" on page 73). all available channels ❏ Use Auto Program in the Channel menu to add receivable TV channels that are not presently in TV memory (see page 73). Cannot receive channels Unable to select a channel ❏ Use Auto Program in the Channel menu to add receivable TV channels that are not presently in TV memory (see page 73). Lost password ❏ In the password screen (see page 75), enter the following master password: 4357. The master password clears your previous password; it cannot be used to temporarily unblock channels. Cannot change channels with ❏ Be sure you have not inadvertently switched your LCD projection TV from the remote control channel 3 or 4 setting if you are using another device to change channels. ❏ If you are using another device to control channels, be sure the "function" button for that device has been pressed, or the slide switch is set correctly. For example, if you are using your cable to control channels, be sure to press SAT/CABLE. Cannot cycle through the other ❏ Be sure the Video Label feature has not been set to Skip (see page 80). video equipment connected to the LCD projection TV 88