Sony KP-53HS30 Operating Instructions - Page 24
Connecting a Satellite Receiver with a VCR, AUDIO and S VIDEO OUT jacks to the VCR's AUDIO and S VIDEO
View all Sony KP-53HS30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installing and Connecting the Projection TV Connecting a Satellite Receiver with a VCR Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver's SATELLITE IN jack. 2 Connect the CATV cable to the VCR's VHF/UHF IN jack. 3 Using a coaxial cable, connect the VCR's OUT jack to the projection TV's VHF/UHF jack. 4 Using AUDIO and S VIDEO cables, connect the satellite receiver's AUDIO and S VIDEO OUT jacks to the VCR's AUDIO and S VIDEO IN jacks. 5 Using AUDIO and S VIDEO cables, connect the VCR's AUDIO and S VIDEO OUT jacks to the TV's AUDIO and S VIDEO IN jacks. Rear of projection TV Satellite receiver Satellite antenna cable AUDIO-R (red) AUDIO-L (white) VIDEO (yellow) S VIDEO Coaxial cable YC-15V/30V (not supplied) VCR VMC-810S/ 820S (not supplied) VMC-810S/820S (not supplied) 24 YC-15V/30V (not supplied) Cable ✍ Be sure your VCR's video input is set correctly. Consult your VCR's operating manual for instructions. ✍ Use TV/VIDEO to select - VIDEO 1 to watch satellite TV or the VCR. (Your VCR must be turned on) - VHF/UHF to watch cable TV. ✍ If your VCR or satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.